How To Upcycle A Headboard

To get started, I visited my local Sherwin-Williams paint store where the painting expert suggested Extreme Bond Primer so I don’t have to worry about scuff-sanding the headboard’s glossy surface. For my finish coat, I wanted a rich, dark tone in a matte finish. Typically, if I want a durable coating, I turn to a glossier finish, but Sherwin-Williams offers a paint called Emerald® that will give me the true color (Dard Hunter Green SW 0041) I’m after, while remaining durable and washable in a matte finish. I also picked up paint sticks, a paint tray and liners, a 2 ½-inch angled tip synthetic paint brush, a roller frame, a 3/8-inch nap roller cover, and a drop cloth, wood filler, a 220-grit sanding sponge, stock boards and screws. This DIY painted headboard project is sponsored by Sherwin-Williams®. All opinions are our own.

Steps for upcycling a headboard:

Step 1: Prep the Headboard To prep the headboard, clean it with warm water mixed with mild detergent. Once it has dried. Fill any dents or scratches with wood filler. Allow the filler to dry, and then sand the areas smooth with the sanding sponge. *WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. Step 2: Assemble the Cubbies Size and assemble 1/2-inch-by-6 boards to create the cubbies using wood glue and finish nails. You can use the cut list above, though the size of the cubbies may vary based on the size of your headboard. Step 3: Apply the Primer Now it’s time to apply primer to the headboard and cubbies. First roll the flat section with a roller. Once the flat sections are coated, prime the details using a brush. Blend the areas where the brush strokes meet the rolled sections with a slightly dryer brush and very light strokes. Apply a coat of primer to the cubbies. Step 4: Apply the Paint with a Roller It’s finally time to apply the paint. Begin by filling the paint tray. Load the roller in the paint tray until evenly coated. Apply paint to the flat sections of the headboard. Step 5: Apply the Paint with a Brush Now use a brush to apply paint to the headboard’s details. Apply a coat of paint to the cubbies using the paint brush and roller. Once the paint is dry, you can lightly sand the finish with a sanding sponge and apply a second coat, if necessary. Step 6: Mount the Cubbies Finish by securing the cubbies to the back of the headboard with screws.

Materials:

Sherwin-Williams Emerald® Interior Acrylic Latex Paint Paint Cup Paint Cup Liner Roller Tray and Liner (2) 1/2 x 6 x 3’ Boards 1 1/4-inch Wood Screws Wood Filler Drop Cloth

Tools: